FIBERSTAR G
Pre-insulated metal panels with insulation in GLASS WOOL for walls with hidden joint.
Dimensions
width mm 1000
length upon request from continuous production process.
Standard insulating thickness
mm 80 - 100 panels of non standard thicknesses can be supplied upon request previous agreement on minimum quantities.
Supports
galvanized steel, galvanized prepainted or plastified steel; stainless steel; natural or prepainted aluminium; copper (CORAM).
Isolation
glass wool fibers average nominal density 55 Kg/m3 ± 10% - λ = 0,039 W/mK
EPD certification (CAM)
For more information on CAM certification, contact the technical / commercial department.
Reaction to fire
A2,s1-d0
Sustainability
recycled glass: 80% - end of life recyclability: 100%
Protective treatments for external support available
On request for external polyester coating, atoxic prepainted for food contact, silicone polyester, PVDF, thermoplastic Class A application of PVC plastic films or other films
ADVANTAGES / STRENGTHS
|
• Insulation with a high level of purity: minimum presence of impurities within the fibers; |
• Insulating material with improved acoustic performance thanks to new generation binders and more homogeneous and long fibers;
|
• Improved thermal insulation compared to mineral wool (glass wool λ = 0,039 W/mK); |
• Over 80% of the raw material is recycled from the glass; |
• Glass wool is made of a new generation thermosetting resin with a minimum content of harmful chemicals; |
• High durability over time; |
• Excellent mechanical resistance; |
• Dimensional stability with variations in temperature and humidity; |
• Entirely produced in Italy; |
LOADS TABLE
PITCH BETWEEN SUPP.(m)
PANEL TICKNESS(mm)
SHEET TICKNESS(mm)
MATERIAL
MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION * |
---|
Panel Thickness (mm) | Material | Sheet thickness (mm) | Pitch 'L' in meters between the supports |
---|
 |
1,50 |
2,00 |
2,50 |
3,00 |
3,50 |
4,00 |
4,50 |
5,00 |
5,50 |
6,00 |
---|
50 | ACCIAIO | 0,5 + 0,5 |
216 |
121 |
78 |
54 |
40 |
30 |
24 |
19 |
16 |
13 |
60 | ACCIAIO | 0,5 + 0,5 |
207 |
117 |
75 |
52 |
38 |
29 |
23 |
19 |
15 |
13 |
80 | ACCIAIO | 0,5 + 0,5 |
277 |
156 |
100 |
69 |
51 |
39 |
31 |
25 |
21 |
17 |
100 | ACCIAIO | 0,5 + 0,5 |
371 |
209 |
134 |
93 |
68 |
52 |
41 |
33 |
28 |
23 |
120 | ACCIAIO | 0,5 + 0,5 |
446 |
251 |
160 |
111 |
82 |
63 |
50 |
40 |
33 |
28 |
150 | ACCIAIO | 0,5 + 0,5 |
462 |
314 |
201 |
139 |
102 |
78 |
62 |
50 |
41 |
35 |
200 | ACCIAIO | 0,5 + 0,5 |
480 |
360 |
268 |
186 |
137 |
105 |
83 |
67 |
55 |
47 |
MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION * |
---|
Panel Thickness (mm) | Material | Sheet thickness (mm) | Pitch 'L' in meters between the supports |
---|
 |
1,50 |
2,00 |
2,50 |
3,00 |
3,50 |
4,00 |
4,50 |
5,00 |
5,50 |
6,00 |
---|
50 | ACCIAIO | 0,5 + 0,5 | 121 | 90 | 67 | 39 | 25 | 18 | 13 | — | — | — |
60 | ACCIAIO | 0,5 + 0,5 | 121 | 90 | 72 | 51 | 33 | 23 | 17 | 13 | 10 | — |
80 | ACCIAIO | 0,5 + 0,5 | 195 | 144 | 114 | 83 | 52 | 36 | 26 | 20 | 15 | 12 |
100 | ACCIAIO | 0,5 + 0,5 | 216 | 159 | 126 | 95 | 58 | 38 | 27 | 20 | 15 | 12 |
120 | ACCIAIO | 0,5 + 0,5 | 220 | 162 | 129 | 107 | 69 | 46 | 32 | 24 | 18 | 15 |
150 | ACCIAIO | 0,5 + 0,5 | 230 | 169 | 134 | 111 | 95 | 65 | 45 | 33 | 25 | 20 |
200 | ACCIAIO | 0,5 + 0,5 | 248 | 182 | 143 | 119 | 101 | 89 | 70 | 51 | 38 | 30 |
Insights on the test report
(Note) The report test given, is provided for information purposes only. Values and formulas should not be used to determine or calculate the flow rate of the panel. It is the responsibility and care of the customer and/or designer to draft appropriate calculations with specific reference for individual uses. The thicknesses and quality of steel defined in the report test above, does not represent a standard of product as the combination of thicknesses and materials is determined by the customer according to their technical requirements, therefore the customer and/or the designer are required to specify thickness, quality and type of materials that the producer will use in the construction of the panels.
* deflection = 1/100 L